CreateCameraInfo - ComfyUI Built-in Node Documentation

The Create Camera Info node builds a camera information structure for 3D rendering. It supports three modes for defining the camera: orbit (yaw/pitch/distance around a target), look_at (explicit world position), and quaternion (position plus rotation). The coordinate system is right-handed with Y as the up axis.

Inputs

Parameter	Description	Data Type	Required	Range
`mode`	How to define the camera: orbit angles, an explicit position, or a position + quaternion.	DYNAMIC_COMBO	Yes	`"orbit"` `"look_at"` `"quaternion"`
`target_x`	Look-at point (orbit pivot / aim). In orbit mode, move it to pan/translate the whole camera. Ignored in quaternion mode. Defaults to the origin. (default: 0.0)	FLOAT	No	-1000.0 to 1000.0
`target_y`	Y component of the target point. (default: 0.0)	FLOAT	No	-1000.0 to 1000.0
`target_z`	Z component of the target point. (default: 0.0)	FLOAT	No	-1000.0 to 1000.0
`roll`	Camera roll about the view axis, in degrees. (default: 0.0)	FLOAT	No	-180.0 to 180.0
`fov`	Vertical field of view in degrees. (default: 35.0)	FLOAT	No	1.0 to 120.0
`zoom`	Digital zoom (focal-length multiplier). Values greater than 1 zoom in without moving the camera. (default: 1.0)	FLOAT	No	0.01 to 100.0
`camera_type`	Projection used by Render Splat: perspective (foreshortening) or orthographic (parallel). (default: “perspective”)	COMBO	No	`"perspective"` `"orthographic"`

Mode-Specific Parameters

When mode is set to "orbit", the following parameters become available:

Parameter	Description	Data Type	Required	Range
`yaw`	Horizontal rotation angle around the target. (default: 35.0)	FLOAT	Yes	-360.0 to 360.0
`pitch`	Vertical rotation angle around the target. (default: 30.0)	FLOAT	Yes	-89.0 to 89.0
`distance`	Camera distance from the target. (default: 4.0)	FLOAT	Yes	0.01 to 1000.0

When mode is set to "look_at", the following parameters become available:

Parameter	Description	Data Type	Required	Range
`position_x`	Camera position in world space (right-handed, Y-up). (default: 4.0)	FLOAT	Yes	-1000.0 to 1000.0
`position_y`	Y component of the camera position. (default: 4.0)	FLOAT	Yes	-1000.0 to 1000.0
`position_z`	Z component of the camera position. (default: 4.0)	FLOAT	Yes	-1000.0 to 1000.0

When mode is set to "quaternion", the following parameters become available:

Parameter	Description	Data Type	Required	Range
`position_x`	Camera position in world space (right-handed, Y-up). (default: 4.0)	FLOAT	Yes	-1000.0 to 1000.0
`position_y`	Y component of the camera position. (default: 4.0)	FLOAT	Yes	-1000.0 to 1000.0
`position_z`	Z component of the camera position. (default: 4.0)	FLOAT	Yes	-1000.0 to 1000.0
`quat_x`	X component of the camera world-rotation quaternion. (default: 0.0)	FLOAT	Yes	-1.0 to 1.0
`quat_y`	Y component of the camera world-rotation quaternion. (default: 0.0)	FLOAT	Yes	-1.0 to 1.0
`quat_z`	Z component of the camera world-rotation quaternion. (default: 0.0)	FLOAT	Yes	-1.0 to 1.0
`quat_w`	Camera world-rotation quaternion (three.js: looks down local -Z). Normalized for you. (default: 1.0)	FLOAT	Yes	-1.0 to 1.0

Note: The target_x, target_y, and target_z parameters are ignored when mode is set to "quaternion". In "orbit" mode, these target parameters define the pivot point around which the camera orbits.

Outputs

Output Name	Description	Data Type
`camera_info`	Camera information structure containing position, rotation, field of view, zoom, and projection type for 3D rendering.	LOAD3DCAMERA

This documentation was AI-generated. If you find any errors or have suggestions for improvement, please feel free to contribute! Edit on GitHub

Source fingerprint (SHA-256): 5a9703e8e01ad2cd92a97da8d892c278765a9cef8bcd38e3336d1f73717d9895

​Inputs

​Mode-Specific Parameters

​Outputs

Inputs

Mode-Specific Parameters

Outputs